How To Clean a Dryer Exhaust Hose
Cleaning A Dryer Exhaust Hose
You are doing laundry at your home in Morrisons Cove, PA and suddenly smell a burning odor. Panic spreads as you realize the smell is coming from your dryer. A lint fire is the last thing you may expect, but it can happen. Even though you clean the lint filter before each load as recommended, sometimes that is not enough to prevent a dryer fire. If you notice a decrease in the efficiency of your dryer, clean out the exhaust hose and vent by following the steps below.
1. Cut the power. Unplug the dryer cord from the outlet. This allows you to easily and safely move the dryer around for cleaning.
2. Detach the hose. The exhaust hose, an accordion shaped tube, connects from the back of the dryer to the wall. Depending on your dryer, either squeeze or unscrew a bolt to loosen the circular clamp. Remove the hose from both the wall and the dryer.
3. Empty the lint. Use a long brush or vacuum attachment to remove the accumulated lint from the detached exhaust hose. This step is key to preventing a lint fire.
4. Use a cleaning rod. Carefully insert the brush on the cleaning rod into the wall vent, rotating as you go. Remove, clean the brush and repeat until the lint is clear.
5. Attach the hose. Reattach the exhaust hose to the dryer and wall. Tighten the clamp, plug the dryer in and ensure there is no escaping air before pushing the dryer back against the wall.
6. Check the vent. The outside vent is typically a square vent with a screen. Remove the screen and take out any accumulated lint. Use a vacuum or brush to clean remaining lint and reattach the screen.
Properly clean the dryer exhaust hose at your home in Morrisons Cove, PA to keep your dryer running effectively and prevent a lint fire. If a fire occurs, immediately call 911 and exit the house. After the fire is contained, contact your insurance company and a fire restoration specialist to assess the fire damage and return your home to pre-fire condition.